Wifi-test

Warning

This project no longer exists. We’ve archived a copy of wifi-test 1.0

wifi-test is fully automated test script for linux wireless drivers. It’s an open-source project.

Git tree

http://www.intellinuxwireless.org/repos/wifi-test.git

Mailing list and posting patches

This project has its own mailing list.

Wifi test 1.0

wifi-test 1.0 covers following wireless features:

• BSS: BSS association, fragmentation/RTS/CTS, BSS channels etc

• IBSS: IBSS association, IBSS fragmentation/RTS/CTS, IBSS channels.

• Security: WEP (BSS/IBSS), WPA/WPA2, 802.1X.

• Power management: S3/S4, RFKILL

• Performance: upload/download speed for different combinations.

• Others: Wext mode, nl80211 mode

• 802.11 a/b/g/n: Above features in a/b/g/n band.

Testing environment setup

The minimum testing system requirements are listed below.

• Two test machines: One as test machine, the other as peer machine in IBSS network testing. If only BSS is tested, one test machine is enough.

• One server machine: The server machine needs two Ethernet cards, one connects to the Test machine network and the other to the AP network.

• One AP: Support Cisco AP, Dlink and ASUS AP with CLI (Command Line Interface). For example, Dlink DWL-8200 AP and Cisco1200 series AP. Here is an example of our test environment:

---------------
| Test Machine |
--------------\
               \ ---------                    --------
                | Test    |     -------      |  AP    |   ---
                | machine |----| Server |----| network|--| AP |
                | network |     -------      |        |   ---
               / ---------                    --------
------------- /
| Peer Machine |
--------------

Bugs

If you run into bugs please report them through the Intel Bugzilla.