Wifi-test ========= .. warning:: This project no longer exists. We've archived a copy of :download:`wifi-test 1.0 <../../../media/en/developers/testing/wifi-test-1.0.tar.gz>` wifi-test is fully automated test script for linux wireless drivers. It's an open-source project. Git tree -------- :: http://www.intellinuxwireless.org/repos/wifi-test.git Mailing list and posting patches -------------------------------- This project has its own `mailing list `__. Wifi test 1.0 ------------- `wifi-test 1.0 `__ covers following wireless features: - BSS: BSS association, fragmentation/RTS/CTS, BSS channels etc - IBSS: IBSS association, IBSS fragmentation/RTS/CTS, IBSS channels. - Security: WEP (BSS/IBSS), WPA/WPA2, 802.1X. - Power management: S3/S4, RFKILL - Performance: upload/download speed for different combinations. - Others: Wext mode, nl80211 mode - 802.11 a/b/g/n: Above features in a/b/g/n band. Testing environment setup ------------------------- The minimum testing system requirements are listed below. * Two test machines: One as test machine, the other as peer machine in IBSS network testing. If only BSS is tested, one test machine is enough. * One server machine: The server machine needs two Ethernet cards, one connects to the Test machine network and the other to the AP network. * One AP: Support Cisco AP, Dlink and ASUS AP with CLI (Command Line Interface). For example, Dlink DWL-8200 AP and Cisco1200 series AP. Here is an example of our test environment: :: --------------- | Test Machine | --------------\ \ --------- -------- | Test | ------- | AP | --- | machine |----| Server |----| network|--| AP | | network | ------- | | --- / --------- -------- ------------- / | Peer Machine | -------------- Bugs ---- If you run into bugs please report them through the `Intel Bugzilla `__.